Skip to content
Speck PumpenPool pumps and filters · Pool pumps

Speck Badu Top II/14 1-phase

Availability and delivery time confirmed in the quote (1 working day) · delivery by arrangement or collection in Dicmo

Speck BADU Top II/14 self-priming pool circulation pump, single-phase (230 V): shaft power 0.65 kW, built-in pre-filter, 2" / 1½" connection, can be installed up to 3 m above or below the water level.

€790.00VAT includedBase price on 10 September 2026: €790.00
Ask on WhatsApp
Delivery by arrangement; collection in Dicmo free.
Payment by quote and bank transfer; card payment coming soon

Description

The Speck BADU Top II/14 is a self-priming circulation pump that pushes pool water through the filtration system. The monobloc design has a built-in pre-filter basket and a mechanical seal on a plastic impeller hub. The single-phase motor (230 V) has a shaft power of 0.65 kW and a power input of 0.97 kW, and the maximum head is 16.5 m. According to Speck Nederland, the Top II/8–/14 series is intended for prefabricated (above-ground) and small pools with a volume of 30–90 m³.

Advantages

  • Self-priming: may be installed up to 3 m above or below the water level
  • The motor and pump shaft does not come into contact with the pool water, so the motor is electrically separated from the water
  • Thanks to the high suction capacity, an automatic pool cleaner can be connected to the pump (Speck Nederland data)
  • Polypropylene housing, carbon/ceramic/NBR mechanical seal
  • Protection rating IP55, insulation class F, maximum water temperature 40 °C

In the box

  • BADU Top II/14 pump
  • Built-in pre-filter basket
  • 3.5 m connection cable with plug

The pump must not run dry, as this can destroy the seal and plastic parts within a few seconds, nor with closed valves (the minimum flow rate is 10% of Qmax). The pipe dimensions from the datasheet apply to a suction line of up to 5 m; self-priming can take up to 12 minutes. Leave the electrical connection to an authorised electrician.

Specifications

Flow rate8–14 m³/h (range for the whole Top II/8–/14 series)
Headmaximum 16.5 m
Power0.65 kW (P2, shaft power)
Power input0.97 kW (P1)
Voltage230 V, 50 Hz, single-phase
Current4.70 A
Connectionsuction 2", pressure 1½"; recommended pipe Ø 63 mm (suction), Ø 50 mm (pressure)
Cable length3.5 m, with plug
Suction heightup to 3 m (pump above or below the water level)
Protection ratingIP55, insulation class F
Operating temperaturewater up to 40 °C (GS approval)
Noise level62.2 dB(A) at a distance of 1 m
Lengthmaximum 505 mm
Weight12.0 kg
Materialpolypropylene housing; carbon/ceramic/NBR mechanical seal

Need advice?

Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.

+385 95 377 6396Message us on WhatsApp

Related products

What customers buy with this.

All products in pool pumps and filters
Aster filter D500, 9 m³/h, 1½" side connection

Pool filters

Aster filter D500, 9 m³/h, 1½" side connection

5 variants

€855.00Base price on 10 September 2026: €855.00
Quartz sand 0.4–0.8 mm

Pool filters

Quartz sand 0.4–0.8 mm

3 variants

€15.50Base price on 10 September 2026: €15.50
Galactic monobloc filter D380, 5 m³/h

Pool filters

Galactic monobloc filter D380, 5 m³/h

2 variants

€830.00Base price on 10 September 2026: €830.00
Activated glass 0.5–1.0 mm

Pool filters

Activated glass 0.5–1.0 mm

2 variants

€35.00Base price on 10 September 2026: €35.00