Skimmers and built-in fittings
Overflow grating for overflow pools.
The grating covers the overflow channel around an overflow pool: the water spills over the edge, passes through the grating and runs into the balance tank. The grating width follows the channel width, with 90° corner pieces at the corners; we calculate the length and corners from your pool drawing.

Overflow gratings
90° corner plates for overflow channels, height 22 mm, width 195 mm
4 variants

Overflow gratings
Modular transverse grating, height 22 mm, width 195 mm
4 variants
How to choose
Overflow grating for overflow pools: what to check before you buy.
As a rule of thumb, one skimmer per 25 m² of water surface, and skimmers are placed on the side towards which the wind carries the debris. An 8 × 4 m pool (32 m²) usually has two skimmers.
They differ in the flange: a skimmer for a liner pool has a frame with inserts that clamp the liner, while a concrete-pool skimmer is built directly into the concrete and finished with mosaic or ceramic tile.
Advice
Overflow grating for overflow pools: advice from our service team.
Infinity and overflow pools: how they really work
Water level flush with the edge, a perimeter channel and a balance tank – and what that means for the plant room.

Pool systems and equipment: how to put together a plant room
The four essential parts of a plant room – pump, filter, multiport valve and disinfection – and what is added as needed.

Ceramics and tiles for pools: which to choose
Glass mosaic, porcelain ceramic or PVC liner – water absorption and slip resistance decide, not appearance.

