
Aster filter D500, 9 m³/h, 1½" side connection
AstralPool Aster laminated sand filter, Ø 500 mm, flow rate 9 m³/h, with a 1½" side-mount multiport valve. Supplied without sand; the tank holds 95 kg of 0.4–0.8 mm quartz sand.
VariantD500, 9 m³/h, 1½"
Description
The AstralPool Aster D500 is a laminated sand filter for family pools. The 500 mm diameter tank is made of polyester and fibreglass, with a polypropylene base and a screwless lid. The 1½" side-mount multiport valve has the positions filtration, backwash, rinse, recirculation, waste and closed; turn it only while the pump is switched off. The filter complies with EN 16713-1.
Advantages
- Flow rate of 9 m³/h at the maximum filtration rate of 50 m³/h/m²
- Maximum operating pressure of 2.5 bar
- Compatible with quartz sand and active glass
- Pressure gauge, plug for draining sand and water, and manual air release
In the box
- Aster D500 filter with 1½" side-mount multiport valve
- Pressure gauge
- Filter media not included: sand or active glass is ordered separately
The D500 tank holds 95 kg of 0.4–0.8 mm quartz sand (manufacturer's datasheet). Choose the filter by flow rate, not by pump power: 9 m³/h is the filter's maximum flow rate, not an operating point. By the rule (volume × 2) ÷ 8, i.e. two turnovers of the water in 8 hours of filtration, it covers a pool of up to about 36 m³ (e.g. 7 × 3.5 × 1.4 m). For an 8 × 4 × 1.5 m pool (48 m³, 12 m³/h), choose the D600 with a separate pump.
A filter is chosen by flow rate, not by pump power: the rated 9 m³/h is the maximum, not the operating point. For a pool of 8 × 4 × 1.5 m (48 m³, 12 m³/h) you need the D600 with a separate pump — more in the article on the sand filter pump for a pool.
Specifications
| Filter diameter | 500 mm |
|---|---|
| Flow rate | 9 m³/h (at a filtration rate of 50 m³/h/m²) |
| Filtration rate | maximum 50 m³/h/m² |
| Filtration area | 0.19 m² |
| Connection | 1½" (Ø 50 mm), side-mount multiport valve |
| Filter media | quartz sand 0.4–0.8 mm or active glass |
| Filter media quantity | 95 kg of 0.4–0.8 mm sand (not included) |
| Pool volume | up to 72 m³ (one water turnover in 8 h) |
| Maximum operating pressure | 2.5 bar |
| Material | polyester and fibreglass laminate; polypropylene base |
| Colour | grey |
| Standard | EN 16713-1 |
Goes with this filter
Victoria Plus Silent pump 75M (11 m³/h) or 100M (16 m³/h), quartz sand 0.4–0.8 mm (€15.50) or activated glass (€35) and the Aster pressure gauge kit.
All pumps and filtersRelated products
What customers buy with this.

Pool pumps
Victoria Plus Silent 100M, 16 m³/h, 0.78 kW
10 variants

Salt electrolysis
AstralPool E-Next salt chlorinator 12 g/h, up to 50 m³
4 variants
Advice
Read before you buy.
Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.



