
Sena 100T 13.8 m³/h
AstralPool Sena 100T self-priming pump for filtering family pools: three-phase (230/400 V), 0.55 kW motor, 2 l pre-filter, protection rating IP55, Ø 50 mm connections.
Description
The AstralPool Sena 100T is a self-priming pump for filtering small and medium-sized family pools. The three-phase motor has a rated power of 0.55 kW and a voltage of 230/400 V. The pump delivers 14.4 m³/h at a head of 8 m, and the maximum head is 13.8 m. The built-in pre-filter, with a volume of 2 l, has a transparent lid, so leaves and debris can be checked before they reach the pump.
Advantages
- Parts in contact with water are made of AISI 316 stainless steel
- Protection rating IP55, class F insulation
- According to the manufacturer, it withstands common chemical water treatments, including salt electrolysis
- Ø 50 mm connections for gluing
- Compact design, length less than 490 mm
In the box
- Sena 100T self-priming pump
- Integrated 2 l pre-filter with transparent lid
- Connection fittings (according to the manufacturer's leaflet)
The flow rate of 14.4 m³/h applies at a head of 8 m; the maximum flow rate of 18.8 m³/h is reached at a head of 4 m. The pump's flow rate at its operating point should not exceed the maximum flow rate of the filter it is connected to. Leave the electrical connection to an authorised electrician. A three-phase connection is required for the three-phase motor.
Specifications
| Flow rate | 14.4 m³/h at a head of 8 m |
|---|---|
| Maximum flow rate | 18.8 m³/h at a head of 4 m |
| Head | maximum 13.8 m |
| Power | 0.55 kW (rated motor power) |
| Power input | maximum 0.82 kW |
| Voltage | 230/400 V, three-phase |
| Connection | Ø 50 mm, for gluing |
| Pre-filter volume | 2 l |
| Protection rating | IP55, class F insulation |
| Material | parts in contact with water: AISI 316 stainless steel |
| Length | less than 490 mm |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Pool filters
Aster filter D500, 9 m³/h, 1½" side connection
5 variants
Advice
Read before you buy.
Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.




