
Sena 100M 13.8 m³/h
AstralPool Sena 100M self-priming pump for filtering family pools: single-phase (230 V), 0.55 kW motor, 2 l pre-filter, protection rating IP55, Ø 50 mm connections.
Description
The AstralPool Sena 100M is a self-priming pump for filtering small and medium-sized family pools. The single-phase motor has a rated power of 0.55 kW and a voltage of 230 V. The pump delivers 14.9 m³/h at a head of 8 m, and the maximum head is 13.8 m. The built-in pre-filter, with a volume of 2 l, has a transparent lid, so leaves and debris can be checked before they reach the pump.
Advantages
- Parts in contact with water are made of AISI 316 stainless steel
- Protection rating IP55, class F insulation
- According to the manufacturer, it withstands common chemical water treatments, including salt electrolysis
- Ø 50 mm connections for gluing
- Compact design, length less than 490 mm
In the box
- Sena 100M self-priming pump
- Integrated 2 l pre-filter with transparent lid
- Connection fittings (according to the manufacturer's leaflet)
The flow rate of 14.9 m³/h applies at a head of 8 m; the maximum flow rate of 19.3 m³/h is reached at a head of 4 m. The pump's flow rate at its operating point should not exceed the maximum flow rate of the filter it is connected to. Leave the electrical connection to an authorised electrician.
Specifications
| Flow rate | 14.9 m³/h at a head of 8 m |
|---|---|
| Maximum flow rate | 19.3 m³/h at a head of 4 m |
| Head | maximum 13.8 m |
| Power | 0.55 kW (rated motor power) |
| Power input | maximum 0.87 kW |
| Voltage | 230 V, single-phase |
| Connection | Ø 50 mm, for gluing |
| Pre-filter volume | 2 l |
| Protection rating | IP55, class F insulation |
| Material | parts in contact with water: AISI 316 stainless steel |
| Length | less than 490 mm |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Pool filters
Aster filter D500, 9 m³/h, 1½" side connection
5 variants
Advice
Read before you buy.
Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.




