
Galactic monobloc filter D500, 10 m³/h
AstralPool Galactic monoblock filtration unit, Ø 500 mm, flow rate 10 m³/h: filter, six-way valve and 3/4 HP self-priming pump in a single set.
VariantD500, 10
Description
The AstralPool Galactic Monoblock is a compact filtration unit that combines a filter, a six-way valve and a self-priming pump. The Ø 500 mm model has a flow rate of 10 m³/h and a 3/4 HP pump. The filter body is made of blow-moulded thermoplastic. The unit is intended for above-ground and in-ground pools and for spa pool filtration, and it meets the requirements of EN 16713-1.
Advantages
- Maximum operating pressure 2.4 bar, usual operating pressure 0.6–1.4 bar
- Maximum water temperature 35 °C
- Pump with built-in pre-filter, cable with plug and water drain
- Valve with pressure gauge and air release
- Ø 38 and Ø 50 mm connections on the filter and pump
In the box
- Filter body with a clamp for top access and a water drain
- Six-way valve with pressure gauge and air release
- 3/4 HP self-priming pump with pre-filter, cable and plug
- Base, flexible hose and connecting accessories
Filter media is not in the box. Filling requires 100 kg of sand or glass with a grain size of 0.4–0.8 mm.
Specifications
| Filter diameter | 500 mm |
|---|---|
| Flow rate | 10 m³/h |
| Pump power | 3/4 HP |
| Connection | Ø 38 / Ø 50 mm |
| Filter media | sand or glass 0.4–0.8 mm (not included) |
| Filter media quantity | 100 kg |
| Maximum operating pressure | 2.4 bar |
| Usual operating pressure | 0.6–1.4 bar |
| Maximum water temperature | 35 °C |
| Weight | 25.5 kg |
| Material | filter body: blow-moulded thermoplastic |
| Standard | EN 16713-1 |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Pool filters
Aster filter D500, 9 m³/h, 1½" side connection
5 variants

Pool pumps
Victoria Plus Silent VS 100, variable speed
2 variants
Advice
Read before you buy.
Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).



