
Victoria Plus Silent VS 100, variable speed
AstralPool Victoria Plus Silent VS 100 (1 CV) variable-speed pump for pool filtration: three filtration speeds, built-in control interface, 220–240 V, compatible with Fluidra Connect.
Variant100, variable speed
Description
The AstralPool Victoria Plus Silent VS 100 is a variable-speed pump with a 1 CV motor for pool filtration. It has three adjustable preset filtration speeds and a weekly timer, so the speed can be adapted to the actual needs of the pool. According to the manufacturer's leaflet, at 1,400 rpm it delivers 8.2 m³/h at 170 W, and at 2,750 rpm 16.7 m³/h at 1,030 W. It can be installed in a new pool or replace a single-speed pump.
Advantages
- According to the manufacturer, reducing the rotational speed can lower electricity consumption by up to 85% compared with the single-speed Victoria Plus Silent pump
- At low speed, the noise can be more than 15 dB lower than with a single-speed AstralPool pump (manufacturer's data)
- Built-in control interface (HMI) monitors energy consumption and can be wall-mounted
- Digital inputs and outputs for connecting, for example, a salt electrolysis unit and a heat pump
- Compatible with the Fluidra Connect platform: remote programming and control with a smartphone or tablet
At low speeds, check the minimum flow rate of the connected devices: according to the manufacturer's instructions, about 6 m³/h for heat exchangers and 3–5 m³/h for salt electrolysis units. The water may be up to 35 °C. Leave the electrical connection to an authorised electrician, and do not install the pump in zones 0 and 1 around the pool.
Specifications
| Power | 1 CV (manufacturer's designation) |
|---|---|
| Voltage | 220–240 V, 50/60 Hz |
| Rotational speed | 1,400 / 2,100 / 2,750 rpm (low / medium / high) |
| Flow rate | 8.2 / 12.4 / 16.7 m³/h (at 1,400 / 2,100 / 2,750 rpm) |
| Head | 2.7 / 6.1 / 10 m (at the operating point at 1,400 / 2,100 / 2,750 rpm) |
| Power input | 170 / 470 / 1,030 W (at 1,400 / 2,100 / 2,750 rpm) |
| Current | 1.0 / 2.2 / 4.5 A (at 1,400 / 2,100 / 2,750 rpm) |
| Efficiency | 48 / 26 / 16 l/Wh (at 1,400 / 2,100 / 2,750 rpm) |
| Noise level | 45 / 53 / 61 dB (low / medium / high speed) |
| Connection | 2" GAS thread (according to the leaflet) |
| Operating temperature | water up to 35 °C |
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Pool filters
Aster filter D500, 9 m³/h, 1½" side connection
5 variants

Pool filters
Galactic monobloc filter D380, 5 m³/h
2 variants
Advice
Read before you buy.
Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.



