
SPA Chlorine granules
AstralPool SPA Collection chlorine granules (1 kg): highly stabilised, fast-dissolving organic chlorine for disinfecting hydromassage tub water, does not change pH.
Part of a set
Description
SPA Chlorine Granules are a highly stabilised, fast-dissolving organic chlorine compound for treating water in hydromassage tubs. According to the datasheet they contain at least 55% active chlorine, quickly reach the required level of residual chlorine, and the residual chlorine is more stable in UV light. They do not change the water pH. The pack size is 1 kg.
Advantages
- Fast dissolving, so the required chlorine level is reached quickly
- Stabilised chlorine, long-lasting action in the water
- Does not change the water pH
- Initial (shock) dose 15 g per 1 m³ of water; maintenance 1–3 g per 1 m³ of water per day
Installation and maintenance
- Adjust the water pH to 7.2–7.6 before dosing
- Place the dose in the skimmers and switch on the filter, or distribute it evenly over the water surface, preferably in the evening when there are no bathers
- Keep free residual chlorine at 0.5–2 mg/l; check chlorine and pH at least twice a day
- The doses are guidelines and can be adjusted to the tub and climate
What this product does
Chlorine disinfects the water: it kills bacteria and algae and breaks down the contaminants that bathers bring in. Granules dissolve quickly and are used for shock chlorination; tablets dissolve slowly and keep the chlorine level steady. Chlorine works best when the water pH is between 7.2 and 7.6, so check and correct the pH before chlorinating.
Work out the amount and method of dosing from the instructions on the label and the volume of water in your pool or hot tub.
Safety and labelling
Use biocides safely. Always read the label and product information before use.
Hazard labelling from the label
Warning
- H302 Harmful if swallowed.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
- H410 Very toxic to aquatic life with long lasting effects.
- EUH031 Contact with acids liberates toxic gas.
- EUH206 Warning! Do not use together with other products. May release dangerous gases (chlorine).
We send the safety data sheet on request
Keep out of the reach of children, in the original closed packaging, in a dry and cool place. Do not mix different products or add them at the same time. Always add the product to water, never water to the product.
Specifications
| Pack size | 1 kg |
|---|---|
| Form | granules, white |
| Active substance | organic chlorine compound, active chlorine at least 55% |
| Dosage (initial) | 15 g per 1 m³ of water |
| Dosage (maintenance) | 1–3 g per 1 m³ of water per day |
| Target free chlorine | 0.5–2 mg/l |
| Target pH | 7.2–7.6 |
| pH (1% solution) | 6.5 ± 1.0 |
| Solubility (20 °C) | 28 g per 100 ml of water |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Spa chemicals and accessories
SPA collection 6-in-1 test strips
Advice
Read before you buy.
Robotic pool cleaner or pool vacuum: which to choose
A robot if you want the pool to clean itself, a battery vacuum if you clean now and then – in our range, from €335 to €2,200.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.




