
SPA collection 6-in-1 test strips
AstralPool SPA Collection 6-in-1 test strips (50 strips): measure free and total chlorine, bromine, pH, total alkalinity and total hardness of hydromassage tub water.
Part of a set
Description
The 6-in-1 test strips from AstralPool's SPA Collection range are used for a quick check of hydromassage tub water. One strip measures free chlorine, total chlorine or total bromine, pH, total alkalinity and total hardness of the water. The pack contains 50 strips, and the shelf life is 24 months from production.
Advantages
- Colour chart for each parameter, with the recommended range marked
- Reading after 20 seconds
- Test twice a week, with levels within the recommended range on the chart on the bottle
Installation and maintenance
- With dry hands, take out one strip and close the cap immediately
- Dip the strip to wrist depth, away from the skimmer and return jets, without shaking off excess water, and hold it horizontally for 20 seconds
- Immediately compare the colours in this order: free chlorine, total chlorine or bromine, pH, alkalinity, hardness
- Store at room temperature
Specifications
| Pack size | 50 strips |
|---|---|
| Free chlorine | scale 0–10 ppm (recommended 1–3 ppm) |
| Total chlorine | scale 0–10 ppm (recommended 1–2 ppm) |
| Bromine | scale 0–20 ppm (recommended 2–4 ppm) |
| pH | scale 6.4–8.4 (recommended 7.2–7.5) |
| Total alkalinity | scale 0–240 ppm (recommended 80–120 ppm) |
| Total hardness | scale 0–800 ppm (recommended 150–300 ppm) |
| Reading time | 20 seconds |
| Shelf life | 24 months from production |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.
Advice
Read before you buy.
Robotic pool cleaner or pool vacuum: which to choose
A robot if you want the pool to clean itself, a battery vacuum if you clean now and then – in our range, from €335 to €2,200.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.





