
Victoria Plus Silent 150M, 21.5 m³/h, 1.10 kW
AstralPool Victoria Plus Silent 150M self-priming pump for pool filtration: single-phase (230 V), 1.12 kW motor, 21.5 m³/h at a head of 10 m, pre-filter on the housing, protection rating IP55.
Description
The AstralPool Victoria Plus Silent 150M is a self-priming pump for pool filtration with a single-phase motor of 1.12 kW rated power (230 V). At a head of 10 m it delivers 21.5 m³/h, and the maximum head is 18 m. The large-volume pre-filter is located on the pump body and retains leaves and debris before they reach the impeller. According to the manufacturer, the pump is compatible with salt electrolysis and other water treatment systems.
Advantages
- The pre-filter lid with two handles opens without tools
- Motor with protection rating IP55, designed for warm and humid environments
- Series noise level: 61–70 dB (manufacturer's data)
- Enlarged front bearing for better absorption of axial forces
- According to the manufacturer, fully compatible with pools in which a Victoria Plus pump is already installed
In the box
- Victoria Plus Silent 150M pump
- Built-in pre-filter with a two-handle lid
- PVC accessories kit (according to the manufacturer's data)
The maximum flow rate at a head of 4 m is 29 m³/h. The pump's flow rate at its operating point should not exceed the maximum flow rate of the filter it is connected to. Leave the electrical connection to an authorised electrician, and do not install the pump in zones 0 and 1 around the pool.
Specifications
| Flow rate | 21.5 m³/h at a head of 10 m |
|---|---|
| Maximum flow rate | 29 m³/h at a head of 4 m |
| Head | maximum 18 m |
| Power | 1.12 kW (rated motor power) |
| Power input | maximum 1.40 kW |
| Voltage | 230 V, single-phase |
| Connection | 2" GAS thread; pipe Ø 63 mm |
| Protection rating | IP55 |
| Noise level | 61–70 dB (range for the series) |
| Operating temperature | water up to 35 °C |
| Material | thermoplastic; parts in contact with water resistant to water treatment chemicals |
| Pack size | weight with packaging 17 kg, volume 0.07 m³ |
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Pool filters
Aster filter D500, 9 m³/h, 1½" side connection
5 variants
Advice
Read before you buy.
Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.




