
Automatic multiport valve 2" Astralpool VRAC III
AstralPool VRAC III automatic multiport valve with a 2" connection for automatic control of the operation of a pool sand filter.
Variant2" Astralpool VRAC III
Description
The AstralPool VRAC III is an automatic multiport valve with a 2" connection for pool sand filters. Instead of turning a handle by hand, the valve switches by itself between the positions needed to operate the filter, for example for backwashing it.
Technical features
- Automatic multiport valve for sand filters
- 2" connection
- Manufacturer: AstralPool
Before ordering, check that the valve size (2") matches the connection of your filter and that an electrical connection for controlling the valve is available at the installation site. Leave the electrical connection and installation to an authorised professional. Call us for help with your choice.
Specifications
| Type | automatic multiport valve |
|---|---|
| Connection | 2" |
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Pool filters
Aster filter D500, 9 m³/h, 1½" side connection
5 variants

Pool filters
Galactic monobloc filter D380, 5 m³/h
2 variants
Advice
Read before you buy.
Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.



