
Atlas filter D750, 2" side connection
AstralPool Atlas laminated sand filter, Ø 750 mm, made of polyester resin and fibreglass, with a multiport valve and a 2" connection. Flow rate 22 m³/h, operating pressure up to 2.5 kg/cm².
Description
The AstralPool Atlas D750 is a sand filter with a diameter of 750 mm, made of polyester resin and fibreglass. It is supplied with a six-position multiport valve: filtration, backwash, rinse, recirculation, waste and closed. The connection is 2". The filter complies with EN 16713-1 and can be filled with quartz sand or active glass.
Advantages
- Gel-coat finish in RAL 8029
- Transparent chemical-resistant plastic lid and threaded lid
- 1" collector arms and diffuser made of unplasticised PVC, PN-16 internal pipe
- Built-in safety valve against pressure surges
- 2½" sand drain, pressure gauge, air release and manual water drain
In the box
- Atlas D750 filter (Ø 750 mm)
- Six-position multiport valve, 2" connection
- Pressure gauge, air release and manual water drain
The D750 tank holds 360 kg of 0.4–0.8 mm sand (2007 datasheet); choose the sand or active glass separately. Choose the filter by its flow rate of 22 m³/h, not by pump power. The maximum operating pressure is 2.5 kg/cm².
Specifications
| Filter diameter | 750 mm |
|---|---|
| Flow rate | 22 m³/h |
| Filtration rate | 50 m³/h/m² |
| Filtration area | 0.44 m² |
| Connection | 2", six-position multiport valve |
| Filter media quantity | 360 kg of 0.4–0.8 mm sand |
| Maximum operating pressure | 2.5 kg/cm² |
| Weight | 33 kg |
| Material | polyester resin and fibreglass; collectors and diffuser made of unplasticised PVC |
| Colour | gel-coat RAL 8029 |
| Sand drain | 2½" |
| Standard | EN 16713-1 |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Pool filters
Aster filter D500, 9 m³/h, 1½" side connection
5 variants

Pool filters
Galactic monobloc filter D380, 5 m³/h
2 variants
Advice
Read before you buy.
Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.



