
SPA Hardness stabiliser
AstralPool SPA Collection hardness stabiliser (1 l): liquid dispersant and scale inhibitor that prevents scale deposits in the hydromassage tub.
Description
SPA Hardness Stabiliser is a liquid dispersant and scale inhibitor for hydromassage tubs. It removes and prevents scale deposits and, according to the datasheet, helps prevent iron stains in the water. The manufacturer also states that it helps prevent filter clogging and corrosion of metal parts of the circulation and filtration system. The pack size is 1 l.
Advantages
- Removes and prevents scale deposits
- Helps prevent filter clogging and corrosion of metal parts of the system
- Initial dose 20 ml per 1 m³ of water; maintenance 20 ml per 1 m³ of water per week
Installation and maintenance
- Initial treatment at the start of the bathing season: 20 ml per 1 m³ of water; maintenance: 20 ml per 1 m³ of water once a week (1 cap = 20 ml)
- Dilute the dose in a container of water and distribute it evenly over the water surface while filtration is running
- If the water contains iron, add the product before chlorination or other oxidising treatment
- The doses are guidelines and can be adjusted to the water hardness and salt content
What this product does
A hardness stabiliser prevents scale from forming on the walls, heater and jets when the water is hard (rich in calcium).
Work out the amount and method of dosing from the instructions on the label and the volume of water in your pool or hot tub.
Safety and labelling
Hazard labelling from the label
Danger
- H314 Causes severe skin burns and eye damage.
We send the safety data sheet on request
Keep out of the reach of children, in the original closed packaging, in a dry and cool place. Do not mix different products or add them at the same time. Always add the product to water, never water to the product.
Specifications
| Pack size | 1 l |
|---|---|
| Form | liquid, colourless |
| Dosage (initial) | 20 ml per 1 m³ of water |
| Dosage (maintenance) | 20 ml per 1 m³ of water per week (1 cap = 20 ml) |
| Density | 1.04–1.08 g/cm³ |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Spa chemicals and accessories
SPA collection 6-in-1 test strips
Advice
Read before you buy.
Robotic pool cleaner or pool vacuum: which to choose
A robot if you want the pool to clean itself, a battery vacuum if you clean now and then – in our range, from €335 to €2,200.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.




