
SPA Filter cleaner
AstralPool SPA Collection filter cleaner (1 l): liquid cleaning agent for cartridge filters in hydromassage tubs, removes scale and dirt from the filter, non-foaming.
Part of a set
Description
SPA Filter Cleaner is a liquid cleaning agent for cartridge filters in hydromassage tubs. Residues such as cosmetics and skin collect in the filter, which can form an oily film and clog the filter, so it should be cleaned regularly. The product removes scale and dirt from inside the filter and does not foam. The pack size is 1 l.
Advantages
- Removes scale and dirt from inside the filter
- Non-foaming
- Intended for cartridge filters of spas and hydromassage tubs
Installation and maintenance
- Take out the filter cartridge and rinse it with clean water in a plastic bucket to remove visible dirt
- Add 100 ml of the product and enough clean water to cover the cartridge completely
- Leave the cartridge in the solution for at least 12 hours
- Take it out, rinse it thoroughly with clean water and put it back in the tub
What this product does
The cleaner removes grease, scale and deposits from the part named in the product title (waterline, filter, pipework or surfaces). Rinse that part thoroughly with clean water after cleaning.
Work out the amount and method of dosing from the instructions on the label and the volume of water in your pool or hot tub.
Safety and labelling
Hazard labelling from the label
Danger
- H314 Causes severe skin burns and eye damage.
We send the safety data sheet on request
Keep out of the reach of children, in the original closed packaging, in a dry and cool place. Do not mix different products or add them at the same time. Always add the product to water, never water to the product.
Specifications
| Pack size | 1 l |
|---|---|
| Form | liquid, colourless |
| Dosage | 100 ml per cartridge, with enough water to cover the cartridge |
| Soaking time | at least 12 hours |
| Density | 0.90–0.98 g/cm³ |
| pH | 11–12 |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.
Advice
Read before you buy.
Robotic pool cleaner or pool vacuum: which to choose
A robot if you want the pool to clean itself, a battery vacuum if you clean now and then – in our range, from €335 to €2,200.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.





