
Sensor holder for use under pressure
AstralPool electrode holder for use under pressure, designation ½″ (code 01306). The manufacturer's leaflet lists it with the pH and Rx electrodes of Exactus dosing pumps.
Description
AstralPool electrode holder intended for use under pressure, listed in the manufacturer's catalogue as “Electrode holder (pressure)”. It holds a pH or Rx electrode in a pipeline under pressure. The manufacturer lists it under code 01306 with the size designation ½″, and in the leaflet it is mentioned with the electrodes for Exactus dosing pumps.
Technical features
- Name in the catalogue: Electrode carrier 1/2″ (Electrode holder, pressure)
- Size designation ½″
- Intended use: operation under pressure; for operation without pressure there is a standard electrode holder (code 01305)
- The manufacturer's leaflet mentions it with the pH and Rx electrodes of Exactus pumps
Installation and maintenance
According to the manufacturer's leaflet for the Exactus pumps, fit the measuring electrode in the pipework before the point where the chemical is injected, and avoid air entering. The electrodes must be calibrated before installation. Check the thread type and compatibility with your electrode before ordering.
Specifications
| Type | electrode holder for use under pressure |
|---|---|
| Connection | ½″ (manufacturer's designation) |
| Intended use | pH and Rx electrodes (according to the leaflet for Exactus pumps) |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.
Advice
Read before you buy.
Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).





