
Speck pump strainer with handle
Pre-filter with handle, spare part for Speck Pumpen brand pumps. Retains coarse debris before it enters the pump.
Description
Pre-filter with handle, spare part for Speck Pumpen brand pumps. The pre-filter sits in front of the pump impeller and retains coarse debris, such as leaves and fibres, before it reaches the pump.
Technical features
- Type: pre-filter with handle (spare part)
- Brand: Speck Pumpen
- Category: spare parts for pumps
Installation and maintenance
Before ordering, check the model of your Speck pump (the designation is on the pump's rating plate) and compare the shape of the pre-filter with the old one. If in doubt, call us and give the pump designation.
Specifications
| Type | pre-filter with handle |
|---|---|
| Intended use | spare part for Speck Pumpen brand pumps |
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.
Advice
Read before you buy.
Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).





