
Earthing anode d50
Stainless steel earthing anode, Ø 50 mm version, for conducting away stray currents in salt water. Supplied with a saddle clamp kit.
VariantD50
Description
The AstralPool earthing anode conducts away stray currents that can occur in salt water, and the manufacturer lists it among salt electrolysis equipment. It is made of stainless steel and is simple to install. This version is designated Ø 50 mm (code 25894).
Technical features
- Material: stainless steel
- Ø 50 mm version; the Ø 63 mm version is listed under a separate code (25895)
- Intended use: removing stray currents in salt water
- Supplied with a saddle clamp kit
Installation and maintenance
The manufacturer does not publish installation instructions or additional technical data on the product page, so leave installation and connection to a qualified person. If you are not sure which version (Ø 50 or Ø 63 mm) suits your installation, call us.
Specifications
| Material | stainless steel |
|---|---|
| Diameter | Ø 50 mm |
| Intended use | conducting away stray currents in salt water |
| Pack size | anode and saddle clamp kit |
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.
Advice
Read before you buy.
Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand vs quartz pool filter – which one filters better
‘Sand’ and ‘quartz’ filters are the same thing; the real choice is quartz sand (30–60 µm) or activated glass (down to 5 µm).





