
Stainless steel jet with claws 7 m³/h
AISI-316 stainless steel floor jet with claws, recommended flow rate 7 m³/h; for pools with more aggressive conditions, including salt water.
Description
The jet with claws is made of AISI-316 stainless steel and is intended for pools with more aggressive conditions, including salt water pools. The claws allow simple and secure connection to the pressure pipework. The recommended flow rate is 7 m³/h.
Advantages
- AISI-316 stainless steel
- Suitable for salt water and more aggressive conditions
- Connection to the pressure pipework by means of claws
- Jet length 80 mm, rosette diameter 114 mm
Installation and maintenance
The internal connection fits Ø 50 mm and Ø 63 mm pipes. Leave the installation to the pool contractor, and call us to check compatibility with your pipework.
Specifications
| Material | AISI-316 stainless steel |
|---|---|
| Connection | internal Ø 50 mm and Ø 63 mm |
| Length | 80 mm (jet) |
| Rosette diameter | 114 mm |
| Flow rate | 7 m³/h (recommended) |
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Skimmers and nozzles
ABS pool wall pass-through (through-wall fitting, for liner)
2 variants

Skimmers and nozzles
UNIK 25L skimmer for concrete pools, without inserts
2 variants
Advice
Read before you buy.
Infinity and overflow pools: how they really work
Water level flush with the edge, a perimeter channel and a balance tank – and what that means for the plant room.

Pool systems and equipment: how to put together a plant room
The four essential parts of a plant room – pump, filter, multiport valve and disinfection – and what is added as needed.

Ceramics and tiles for pools: which to choose
Glass mosaic, porcelain ceramic or PVC liner – water absorption and slip resistance decide, not appearance.


