
UNIK water level sensor
AstralPool UNIK water level sensor (code 75973): adjustable sensor integrated into UNIK skimmers, with an ABS protective cover and a 10 m cable; the level is adjustable within a range of 70 mm.
Description
The UNIK water level sensor is fully integrated into UNIK skimmers. The adjustable sensor has an ABS protective cover and is placed and fixed in the corner of the skimmer, and a 10 m cable is included in the set. The water level is adjusted according to the height of the skimmer opening within a range of 70 mm, and the sensor controls level oscillations within ±10 mm.
Advantages
- Placed and fixed in the corner of the UNIK skimmer
- Level adjustment range 70 mm, control of oscillations ±10 mm (manufacturer's data)
- 10 m cable (2 × 0.25 mm) included in the set
- Maximum sensor contact voltage 12 V AC / 30 V DC, 1 A; water temperature 5–40 °C
In the box
- UNIK level regulator with sensor, fixing screw and cable seal
- Water supply jet with seal
- 10 m cable
- Instructions
Installation and maintenance
The sensor is connected to a control unit that opens the pool filling valve. The control unit is not included in the set and must have protection that prevents the valve from staying open in the event of a permanent leak. Make the holes for the regulator and the jet before fitting the skimmer, and take the regulator out and clean it inside from time to time. Leave the installation to a qualified person.
Specifications
| Voltage | maximum 12 V AC / 30 V DC (sensor contact) |
|---|---|
| Current | maximum 1 A |
| Cable length | 10 m (2 × 0.25 mm) |
| Operating temperature | water 5–40 °C |
| Adjustment range | 70 mm |
| Level oscillation control | ±10 mm |
| Material | ABS (protective cover) |
| Connection | water supply jet: Ø 20 mm pipe (glued) or G3/4 thread |
| Water conditions | pH 7.2–7.6; chlorine up to 2 mg/l; bromine up to 5 mg/l; salt (NaCl) up to 6 g/l |
| Intended use | UNIK skimmers |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Skimmers and nozzles
UNIK 25L skimmer for liner pools, with inserts
2 variants

Skimmers and nozzles
UNIK 25L skimmer for concrete pools, without inserts
2 variants

Skimmers and nozzles
ABS pool wall pass-through (through-wall fitting, for liner)
2 variants
Advice
Read before you buy.
Infinity and overflow pools: how they really work
Water level flush with the edge, a perimeter channel and a balance tank – and what that means for the plant room.

Pool systems and equipment: how to put together a plant room
The four essential parts of a plant room – pump, filter, multiport valve and disinfection – and what is added as needed.

Ceramics and tiles for pools: which to choose
Glass mosaic, porcelain ceramic or PVC liner – water absorption and slip resistance decide, not appearance.


