
Zodiac Spa Wand handheld pool vacuum
The Zodiac Spa Wand is a handheld vacuum for spa tubs and small pools: it works without electricity and without a hose, and collects debris in a separate stainless steel filter.
Description
The Zodiac Spa Wand is a handheld cleaner for spa tubs (hydromassage tubs) and small above-ground pools. It works without electricity and without a hose connection: immerse the attachment in the water and create suction with the handle, and the debris is collected in a separate stainless steel filter. It is suitable for small volumes of water and for precise cleaning of steps, overflow channels and built-in filter units.
Advantages
- No electricity and no hose connection
- Collects dust, insects, gravel and leaves
- The separate stainless steel filter can be removed and rinsed with clean water
- Interchangeable attachments for debris on the floor, on the water surface and in narrow corners
Installation and maintenance
Before first use, immerse the attachment and move the handle piston several times to expel the air from the cylinder. Remove the filter according to the instructions, shake out the debris and rinse it with clean water.
Specifications
| Type | handheld vacuum for spa tubs and small pools |
|---|---|
| Drive | manual, no electricity and no hose connection |
| Material | stainless steel filter |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.
Advice
Read before you buy.
Robotic pool cleaner or pool vacuum: which to choose
A robot if you want the pool to clean itself, a battery vacuum if you clean now and then – in our range, from €335 to €2,200.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.





