
Zodiac OS 0800 SpaBot™
Zodiac SpaBot OS 0800: cordless robotic cleaner for spa tubs up to 3 × 3 m; cleans the floor, seats and waterline in a cycle of about 60 minutes. Lithium-ion battery, 1 l / 100 µm filter.
Description
The SpaBot (OS 0800) is an autonomous robotic cleaner for spa tubs, cordless thanks to its lithium-ion battery. According to the manufacturer, it cleans the floor, seats and waterline of a tub up to 3 × 3 m in a single cycle of about 60 minutes. It is intended for rigid and inflatable spa tubs.
Advantages
- 1 l filter tank with a filtration fineness of 100 µm; opens from the top and is easy to clean
- Indicator lights show the charge level and progress through the cycle steps
- The battery charges in less than four hours
- At the end of the cycle it floats on the water surface, and a transparent window allows the debris to be inspected
- Compact and light: weight 2.5 kg
Technical features
The robot has three motors and wheel drive. Protections include safety shut-off out of water and electronic motor protection.
Specifications
| Dimensions | 28 × 25.5 × 23 cm (W × L × H) |
|---|---|
| Weight | 2.5 kg |
| Battery | lithium-ion, 25.4 V / 10 Ah |
| Charging time | less than 4 hours |
| Cycle duration | about 60 minutes (floor, seats, waterline) |
| Spa tub size | up to 3 × 3 m |
| Filter tank | 1 l |
| Filtration fineness | 100 µm |
| Filter area | 123 cm² |
| Number of motors | 3 |
| Suction opening | 7.4 cm |
| Drive | wheels, gears |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.
Advice
Read before you buy.
Robotic pool cleaner or pool vacuum: which to choose
A robot if you want the pool to clean itself, a battery vacuum if you clean now and then – in our range, from €335 to €2,200.

Pool pump: how to choose the right one (filter pump)
A pump is chosen by flow, not motor power: about 12 m³/h for 8 × 4 × 1.5 m – and the upper limit is set by the filter and the pipes.

Sand filter pump for a pool: sizing and installation
A monobloc of pump, filter and valve: flow (volume × 2) ÷ 8, how much sand goes into the D400–D750 and where the unit may be installed.





