
Speck BADU®JET Turbo Pro in-wall element and counter-current unit faceplate, design I
In-wall element with a stainless steel faceplate (design I) for the Speck BADUJET Turbo Pro counter-current unit. With the 3.0 kW drive set, the flow rate is up to 350 m³/h.
Description
BADUJET Turbo Pro is Speck's counter-current unit with a propeller, intended for swimming training, relaxation and rehabilitation. This set forms the in-wall part of the system: a plastic main housing with a stainless steel faceplate in design I. The drive is ordered separately as a drive set.
Advantages
- Flow rate up to 350 m³/h in seven power levels (with the drive set)
- Flow velocity at the jet up to 4.1 m/s
- Controlled by piezo buttons; the colour of the LED button shows the power level
- Electrical parts are hermetically separated from the pool water
- Built in accordance with the standards DIN EN 16582-1 and DIN EN 16713-2
In the box
- plastic main housing
- suction cover
- stainless steel faceplate, design I
- magnet unit and jet unit
- piezo buttons
- seals and screws
The drive set (motor, frequency converter, control box, remote control) is not in the box. The polished stainless steel faceplate refers to the freshwater version; for saltwater pools, Speck offers the Turbo Pro Salt version, so contact us before ordering.
Specifications
| Design | I |
|---|---|
| Material | ABS (housing), stainless steel (faceplate and screws) |
| Flow rate | 150–350 m³/h (with the 3.0 kW drive set) |
| Flow velocity | 1.8–4.1 m/s |
| Number of jets | 1 (Ø 172 mm) |
| Nozzle swivel | ±5° in all directions |
| Number of power levels | 7 |
| Controls | piezo buttons or remote control |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Counter-current swimming
Speck BADU®JET Turbo Pro stainless steel counter-current unit finishing element – 3.0 kW – 400 V

Pool lighting
AstralPool LumiPlus Rapid 1.11 LED RGB spotlight

Counter-current swimming
Speck BADU JET Smart, finishing element with 1.6 kW pump
2 variants
Advice
Read before you buy.
Pool systems and equipment: how to put together a plant room
The four essential parts of a plant room – pump, filter, multiport valve and disinfection – and what is added as needed.

Infinity and overflow pools: how they really work
Water level flush with the edge, a perimeter channel and a balance tank – and what that means for the plant room.

Pool construction in Croatia: the complete guide (2026)
Does a pool need a building permit, how long does it take to build and what does it really cost? The 2026 rules, prices, stages, equipment and Dalmatian specifics.


