
Speck BADU®JET Smart/ Vogue / Wave ABS in-wall element for all pool types
ABS in-wall element for Speck BADUJET Smart, Vogue and Wave counter-current units, for all pool types. Installed in the pool wall before the finishing element.
Description
The in-wall element (Speck's term: Vormontagesatz) is a plastic housing that is installed in the pool wall before the BADUJET Smart, Vogue or Wave finishing element is fitted. Speck's datasheets for Smart, Vogue Deluxe and Wave list the same in-wall element, which is intended for installation in the walls of all pool types.
Advantages
- ABS housing
- One in-wall element for the Smart, Vogue Deluxe and Wave series (same article number in the manufacturer's catalogue)
- For the walls of all pool types
- Version with ball valves possible (ball valve set ordered separately)
In the box
- plastic in-wall housing
- clamping ring
- screws
- seals
Installation and maintenance
The shaft must be at least 70 cm wide. A drain of sufficient cross-section and DN 100 venting and ventilation are required. The finishing element with the pump is ordered separately; the housing is installed during pool construction, and the electrical work should be left to an authorised electrician.
Specifications
| Material | ABS |
|---|---|
| Shaft width | at least 70 cm |
| Venting and ventilation | DN 100 |
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Counter-current swimming
Speck BADU JET Smart, finishing element with 1.6 kW pump
2 variants

Counter-current swimming
Speck BADU®JET Smart counter-current unit finishing element with 2.2 kW – 400 V pump
2 variants

Counter-current swimming
Speck BADU®JET Vogue counter-current unit finishing element with 2.2 kW – 230 V pump
2 variants

Counter-current swimming
Speck BADU®JET Vogue counter-current unit finishing element with 2.6 kW – 400 V pump
2 variants
Advice
Read before you buy.
Pool systems and equipment: how to put together a plant room
The four essential parts of a plant room – pump, filter, multiport valve and disinfection – and what is added as needed.

Infinity and overflow pools: how they really work
Water level flush with the edge, a perimeter channel and a balance tank – and what that means for the plant room.

Pool construction in Croatia: the complete guide (2026)
Does a pool need a building permit, how long does it take to build and what does it really cost? The 2026 rules, prices, stages, equipment and Dalmatian specifics.

