
Speck BADU®JET Primavera ABS in-wall element
ABS in-wall element for Speck BADUJET Primavera counter-current units. Installed in the pool wall before the finishing element with two swivelling jets is fitted.
Description
BADUJET Primavera is Speck's series of counter-current units with two swivelling jets. The in-wall element (Speck's term: Vormontagesatz) is a plastic housing that is installed in the pool wall before the finishing element is fitted. Primavera finishing elements are available with a 3.0 kW (75 m³/h) or 4.0 kW (85 m³/h) pump.
Advantages
- Main housing made of ABS, shut-off valve and fittings made of PVC
- For installation in the walls of all pool types (manufacturer's data)
- The same in-wall element for the Primavera 3.0 kW and 4.0 kW
- The Primavera finishing element includes a handrail and waterproof wireless control
In the box
- plastic in-wall housing
- shut-off valve
- clamping ring with screws and seals
Installation and maintenance
The shaft must be at least 70 cm wide, and a drain of sufficient cross-section is required. The Primavera finishing element uses a suction and discharge line of Ø 75 mm. For tiled concrete pools, the manufacturer lists an additional set for lined pools in its catalogue; please check with us whether it is needed. Order the finishing element and the pump separately.
Specifications
| Material | ABS (main housing), PVC (shut-off valve and fittings) |
|---|---|
| Shaft width | at least 70 cm |
| Connection | suction/discharge line Ø 75 mm (Primavera finishing element) |
| Number of jets | 2 (Primavera finishing element) |
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Pool lighting
AstralPool LumiPlus Rapid 1.11 LED RGB spotlight

Counter-current swimming
Speck BADU JET Smart, finishing element with 1.6 kW pump
2 variants

Massage systems
Waterway Poly Jet massage jet – adjustable
Advice
Read before you buy.
Pool systems and equipment: how to put together a plant room
The four essential parts of a plant room – pump, filter, multiport valve and disinfection – and what is added as needed.

Infinity and overflow pools: how they really work
Water level flush with the edge, a perimeter channel and a balance tank – and what that means for the plant room.

Pool construction in Croatia: the complete guide (2026)
Does a pool need a building permit, how long does it take to build and what does it really cost? The 2026 rules, prices, stages, equipment and Dalmatian specifics.


