
Wall waterfall SilkFlow 900 mm
AstralPool Silkflow wall waterfall, 900 mm long, made of ABS resistant to pool water corrosion. Works with the filtration return line or with a separate pump.
Description
Silkflow is a waterfall built into the pool wall, made of ABS resistant to pool water corrosion. The 900 mm version works with the filtration return line or with a separate pump. At the recommended flow rate, the jet is 800 mm wide at the pool surface.
Technical features
- Length 900 mm, ABS material
- Required water flow rate: 150 l/min (approximate value from the table in the instructions)
- Typical pump: 0.75 HP
- Recommended installation height above the water: 900 mm
Installation and maintenance
- Installed in the wall before the paving and the pool coping stones are laid
- The opening in the wall must be 20 mm longer than the waterfall, with a 10 mm gap at both ends
- A PVC pipe with a diameter of 50 mm is recommended; it is required when the flow rate exceeds 200 l/min or the pipework exceeds 20 m
- The filter is installed in line with the waterfall pump, and a two-way valve for adjusting the amount of water is installed on the discharge side of the pump
- The waterfall is not designed to bear weight
Call us for help with choosing the pump and designing the pipework, and we will be happy to assist.
Specifications
| Length | 900 mm |
|---|---|
| Jet width | 800 mm (at the pool surface, at the recommended flow rate) |
| Recommended installation height | 900 mm above the water |
| Flow rate | 150 l/min (approximate, table in the instructions) |
| Recommended pump | 0.75 HP (typical) |
| Material | ABS |
| Connection | recommended PVC pipe Ø 50 mm |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Pool lighting
AstralPool LumiPlus Rapid 1.11 LED RGB spotlight

Counter-current swimming
Speck BADU JET Smart, finishing element with 1.6 kW pump
2 variants

Massage systems
Waterway Poly Jet massage jet – adjustable
Advice
Read before you buy.
Pool systems and equipment: how to put together a plant room
The four essential parts of a plant room – pump, filter, multiport valve and disinfection – and what is added as needed.

Infinity and overflow pools: how they really work
Water level flush with the edge, a perimeter channel and a balance tank – and what that means for the plant room.

Pool construction in Croatia: the complete guide (2026)
Does a pool need a building permit, how long does it take to build and what does it really cost? The 2026 rules, prices, stages, equipment and Dalmatian specifics.


