
Heat exchanger ZODIAC HEAT LINE 70 PLUS, with circulation pump
Zodiac Heat Line 70 Plus titanium heat exchanger for heating a pool from the home heating system: 70 kW, with circulation pump, flow switch and digital control.
Description
The Zodiac Heat Line 70 Plus is a heat exchanger with titanium tubes that heats pool water using heat from the home heating system: a heat pump, boiler, geothermal or solar system. Zodiac specifies an output of 70 kW at a primary temperature of 90 °C and a pool of up to 200 m³ (private outdoor pool with a cover). The Plus version with pump has a built-in low-consumption class A circulation pump, a flow switch and digital control.
Advantages
- Titanium tubes and housing made of Noryl polyamide
- Reversible interface: pool water can enter from the right or the left side
- Digital control; set pool temperature 2–40 °C in 1 °C steps
- Primary circuit up to 90 °C, operating pressure 2 bar; PVC pool connection Ø 50 or Ø 63 mm
In the box
- Heat Line 70 heat exchanger with titanium tubes
- low-consumption circulation pump, class A
- flow switch
- pre-wired electrical box with 230 V plug and digital control
- non-return valve
A 230 V connection and a separate 30 mA residual-current device are required. A bypass is always recommended and is mandatory when the pool flow rate is above 22 m³/h. The primary circuit requires insulated pipes, a safety valve limited to 3 bar and an expansion vessel of suitable size. Mounting screws are not included in the box.
Specifications
| Heating capacity | 70 kW (primary 90 °C); 30 kW (primary 60 °C); 14 kW (primary 45 °C) |
|---|---|
| Primary circuit flow rate | 3 m³/h |
| Pool water flow rate | 20 m³/h |
| Pressure drop | primary 0.03 bar, pool circuit 0.1 bar |
| Operating pressure | 2 bar (maximum primary pressure 3 bar) |
| Operating temperature | primary 45–90 °C; pool water 2–40 °C |
| Connection | primary Ø 26/34 (thread); pool PVC Ø 50 or Ø 63 mm |
| Weight | 12 kg |
| Material | housing: injection-moulded Noryl polyamide; tubes: titanium |
| Pool volume | up to 200 m³ (private outdoor pool, with cover) |
| Voltage | 230 V, 50 Hz (single-phase) |
| Power input | 33 W (circulation pump) |
| Current | 0.36 A (circulation pump) |
| Protection rating | IP44 |
| Control | digital, set temperature 2–40 °C in 1 °C steps |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.
Advice
Read before you buy.
A pool in the garden: from decision to first swim
A pool measuring 8 × 4 × 1.5 m holds 48 m³; the first fill at the ViK Split tariff costs about €96, around 307 litres evaporate per day in summer, and a concrete shell takes 6–12 weeks to build. Everything you need to decide before excavation starts.

How much does an 8×4 m pool cost? Prices by size (2026)
8x4 m pool price: concrete skimmer ≈€35,000 (excluding the concrete shell), overflow +30%. Table of prices, volumes and equipment for sizes 6×3 to 12×6, plus realistic maintenance costs.

How much does it cost to build a pool? Prices by type and size (2026)
Pool construction cost 2026: a concrete 8×4 m pool from ≈€35,000 (excluding the concrete shell), prices by type and lining, equipment, maintenance and 10-year ownership cost. Real-world price ranges.





