
Heat exchanger KIT D-KWT-Ti 45 Compact Line with circulation pump
Compact water-to-water heat exchanger with a corrugated titanium tube, circulation pump and digital control, 46 kW (primary 90 °C). Supplied fully wired.
Description
The D-KWT-Ti 45 Compact is a compact water-to-water heat exchanger for heating pools, hydromassage tubs and similar systems. A corrugated titanium tube is placed in the plastic housing, and the primary circuit circulation pump, the non-return valve and the digital temperature controller come fully wired. The output is 46 kW at a primary temperature of 90 °C and a pool water temperature of 20 °C.
Advantages
- Primary circulation pump (DAB) with three speeds, non-return valve, power button and LED indicator lamp
- The digital controller displays the actual and the set pool water temperature; the switch-on differential is factory-set to 0.5 °C
- Corrugated titanium tube: chlorides up to 3,000 mg/l, free chlorine without limitation
- Maximum operating pressure: primary 6 bar, pool circuit 2 bar
In the box
- compact heat exchanger with titanium tube
- primary circuit circulation pump with three speeds
- non-return valve
- digital controller with power button and LED indicator lamp
- 2 plastic clamps for wall or floor mounting
The heating pump may only run while the filter pump is running; the manufacturer recommends switching it off about 10 minutes before the filter pump. Install it after the filter, in a location protected from freezing and with water drainage. The electrical part is connected to 230 V with a 30 mA residual-current device; leave this to an authorised electrician.
Specifications
| Heating capacity | 46 kW (primary 90 °C, pool water 20 °C) |
|---|---|
| Output per 1 °C difference | 0.66 kW/°C (at a difference of 70 °C) |
| Exchange surface | 0.15 m² |
| Primary circuit flow rate | 2 m³/h |
| Pool water flow rate | 10 m³/h |
| Pressure drop | primary 0.15 bar, pool circuit 0.15 bar |
| Maximum operating pressure | primary 6 bar, pool circuit 2 bar |
| Voltage | 230 V, 50 Hz |
| Current | 0.34 A (circulation pump) |
| Protection rating | IP54 (controller) |
| Connection | glued coupling D50 (pool circuit) |
| Material | housing: PA66/PP with 30% glass fibre; tube: corrugated, titanium |
| Water quality | chlorides up to 3,000 mg/l, free chlorine without limitation, pH 6.8–7.8; salt content up to 3% |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.
Advice
Read before you buy.
A pool in the garden: from decision to first swim
A pool measuring 8 × 4 × 1.5 m holds 48 m³; the first fill at the ViK Split tariff costs about €96, around 307 litres evaporate per day in summer, and a concrete shell takes 6–12 weeks to build. Everything you need to decide before excavation starts.

How much does an 8×4 m pool cost? Prices by size (2026)
8x4 m pool price: concrete skimmer ≈€35,000 (excluding the concrete shell), overflow +30%. Table of prices, volumes and equipment for sizes 6×3 to 12×6, plus realistic maintenance costs.

How much does it cost to build a pool? Prices by type and size (2026)
Pool construction cost 2026: a concrete 8×4 m pool from ≈€35,000 (excluding the concrete shell), prices by type and lining, equipment, maintenance and 10-year ownership cost. Real-world price ranges.




