
Heat exchanger D-KWT-Ti 105
Water-to-water heat exchanger with a corrugated titanium tube in a plastic housing, 126 kW (primary 90 °C). For heating pool water with hot water from the heating system.
Description
The D-KWT-Ti 105 is a water-to-water heat exchanger from the Italian manufacturer Max Daprà for heating pool water with hot water from the primary heating circuit. A corrugated titanium tube is placed in a plastic housing. At a primary temperature of 90 °C and a pool water temperature of 20 °C, the output is 126 kW. It is installed directly in the pool circulation circuit or on a bypass.
Advantages
- Titanium is resistant to salt water: chlorides up to 3,000 mg/l, free chlorine without limitation
- The corrugated tube gives a larger exchange surface than a smooth tube; exchange surface 0.54 m²
- Maximum operating pressure: primary 6 bar, pool circuit 2 bar
- Pressure drop 0.36 bar on the primary side and 0.30 bar on the pool side
- Housing made of glass-fibre-reinforced plastic, resistant to pressure and corrosion; silicone seals
Installation and maintenance
- Installation after the filter, in a location protected from freezing and with good water drainage
- A non-return valve at the inlet of the primary circuit protects against overheating
- The heating pump must be stopped together with the filter pump; the manufacturer recommends switching it off about 10 minutes before the filter pump
- The disinfection unit is installed after the heat exchanger
The primary circuit circulation pump and the control are not listed in the datasheet for this model. The Compact series offers a complete version with a built-in pump and control. Choose the heat exchanger according to the output of the heat source and the pool volume; call us for the calculation.
Specifications
| Heating capacity | 126 kW (primary 90 °C, pool water 20 °C) |
|---|---|
| Output per 1 °C difference | 1.8 kW/°C (at a difference of 70 °C) |
| Exchange surface | 0.54 m² |
| Primary circuit flow rate | 2 m³/h |
| Pool water flow rate | 15 m³/h |
| Pressure drop | primary 0.36 bar, pool circuit 0.30 bar |
| Maximum operating pressure | primary 6 bar, pool circuit 2 bar |
| Connection | glued coupling, 50 mm (pool circuit) |
| Length | 1,015 mm |
| Diameter | Ø 110 mm |
| Weight | 5.3 kg |
| Material | housing: PA66/PP with 30% glass fibre; tube: corrugated, titanium; seals: silicone |
| Water quality | chlorides up to 3,000 mg/l, free chlorine without limitation, pH 6.8–7.8; salt content up to 3% |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Heat pumps
Astralpool Pro Elyo Touch PET-10 heat pump
9 variants
Advice
Read before you buy.
A pool in the garden: from decision to first swim
A pool measuring 8 × 4 × 1.5 m holds 48 m³; the first fill at the ViK Split tariff costs about €96, around 307 litres evaporate per day in summer, and a concrete shell takes 6–12 weeks to build. Everything you need to decide before excavation starts.

How much does an 8×4 m pool cost? Prices by size (2026)
8x4 m pool price: concrete skimmer ≈€35,000 (excluding the concrete shell), overflow +30%. Table of prices, volumes and equipment for sizes 6×3 to 12×6, plus realistic maintenance costs.

How much does it cost to build a pool? Prices by type and size (2026)
Pool construction cost 2026: a concrete 8×4 m pool from ≈€35,000 (excluding the concrete shell), prices by type and lining, equipment, maintenance and 10-year ownership cost. Real-world price ranges.



