Skip to content
VagnerPoolPool heating · Electric heaters

Electric heater EOVk-9

Available to order · delivery by arrangement or collection in Dicmo

Electric flow-through pool water heater made of AISI 316 stainless steel, 9 kW, 400 V. Electric flow switch, Ø 50 mm connection, operating pressure up to 3 bar.

VariantEOVk-9

On requestprice including delivery and installation is in the quote
Available to order
Ask on WhatsApp
Delivery by arrangement; collection in Dicmo free.
Payment by quote and bank transfer; card payment coming soon

Description

The EOVk-9 is an electric flow-through heater for heating pool water. It is installed in the circulation circuit after the filter, and the water is heated as it passes through the heater. The housing is made of AISI 316 stainless steel and the heating element of Incoloy 800 with added titanium. The 9 kW heater is connected to a three-phase 400 V supply.

Advantages

  • The electric flow switch monitors the flow and prevents the heater from operating without water flow
  • A thermostat for water up to 40 °C and a thermal fuse protect against overheating
  • Operating pressure 0–3 bar, minimum water flow rate 4 m³/h
  • Ø 50 mm connection glued to PVC pipe, with a detachable fitting
  • Permitted water quality: chlorides up to 150 mg/l, free chlorine up to 1 mg/l, pH 7.0–7.8

In the box

  • EOVk-9 heater with built-in thermostat and thermal fuse
  • electric flow switch with ¾″ external thread
  • 2 wall brackets

A contactor and control system are not included; the manufacturer recommends its own control system. In the electrical installation, the heater is connected downstream of the residual-current device (RCD). According to the manufacturer's instructions, this type of heater must not be used in a system with a device that produces chlorine by salt electrolysis. Leave the electrical connection to an authorised electrician.

Specifications

Power9 kW
Voltage400 V (3~)
Current20 A (400 V, 3~; data from the brochure)
ConnectionØ 50 mm, glued to PVC pipe
Length450 mm
Materialhousing: AISI 316 stainless steel; heating element: Incoloy 800 with added titanium
Operating pressure0–3 bar
Minimum flow rate4 m³/h
Operating temperaturewater up to 40 °C
Water qualitychlorides up to 150 mg/l, free chlorine up to 1 mg/l, pH 7.0–7.8
Flow monitoringelectric flow switch, ¾″ external thread

Need advice?

Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.

+385 95 377 6396Message us on WhatsApp

Related products

What customers buy with this.

All products in pool heating
Heat exchanger D-KWT-Ti 25

Heat exchangers

Heat exchanger D-KWT-Ti 25

4 variants

€500.00Base price on 10 September 2026: €500.00
Zodiac Z400 iQ MD4 heat pump

Heat pumps

Zodiac Z400 iQ MD4 heat pump

8 variants

€4,125.00Base price on 9 October 2026: €4,125.00
Zodiac Z350iQ MD4 heat pump

Heat pumps

Zodiac Z350iQ MD4 heat pump

3 variants

€4,120.00Base price on 10 September 2026: €4,120.00
Zodiac Z250iQ MD3 heat pump

Heat pumps

Zodiac Z250iQ MD3 heat pump

10 variants

€2,000.00Base price on 10 September 2026: €2,000.00