
Astralpool Smart Next pH/Rx salt chlorinator 12 g/h
Salt water chlorinator with automatic pH and ORP (Rx) control for pools of up to 50 m³; produces 12 g/h of chlorine. Gas detector, temperature and salinity measurement.
Description
Smart Next pH/Rx 12 g/h is a compact salt water chlorinator (salt electrolysis) with automatic pH and ORP (Rx) control. It produces chlorine from salt dissolved in the pool water. It is intended for pools of up to 50 m³, which is also the manufacturer's recommended volume; the actual volume depends on the water temperature.
Advantages
- Chlorine production 12 g/h, adjustable from 0 to 100%
- Operating modes Normal, Boost (24 h) and Biopool; LCD display with touch keys
- Display of salinity, temperature and pH and ORP values
- Self-cleaning activated titanium electrodes; cell service life up to 10,000 h
- The gas detector recognises the absence of water flow, or a very low flow, through the cell
- Reduced production with a pool cover: programmable 10–90%, volt-free contact
In the box
- Gas flow detector and temperature sensor
- pH and ORP (Rx) probes with compact probe holder
- pH dosing pump
Installation and maintenance
Install the cell after the filter, in the direction of flow marked on it, and isolate it with two valves. Mount the power supply vertically in a dry place, not outdoors, and connect it through a residual-current device (RCD) of up to 30 mA. Install the probes vertically or tilted by up to 40°. A flow switch is available as an option, and control via the Fluidra Pool app is possible with the iQBridge RS gateway.
Specifications
| Chlorine production | 12 g/h |
|---|---|
| Pool volume | up to 50 m³ (depends on water temperature) |
| Recommended pool volume | 50 m³ (manufacturer's data) |
| Voltage | 230 V, 50/60 Hz |
| Salinity | 5–12 g/l (recommended 5–6 g/l) |
| pH measuring range | 0.00–9.99 |
| pH accuracy | ± 0.01 pH |
| pH control range | 7.00–7.80 (Bio OFF); 6.50–8.50 (Bio ON) |
| ORP measuring range | 0–999 mV |
| ORP accuracy | ± 1 mV |
| ORP control range | 600–850 mV (Bio OFF); 300–850 mV (Bio ON) |
| Calibration | automatic, with buffer solutions |
| Dosing pump output | 230 V / 500 mA (maximum) |
| Connection | glued PVC Ø 63 mm (DN 50 / DN 63) |
| Maximum pressure | 1 kg/cm² |
| Operating temperature | water 15–40 °C (ambient up to 40 °C) |
| Cell service life | up to 10,000 h |
| Material | cell: methacrylate derivative; housing: ABS |
| Operating modes | Normal, Boost (24 h), Biopool |
| Connectivity | optional via iQBridge RS and the Fluidra Pool app |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Salt electrolysis
AstralPool E-Next salt chlorinator 12 g/h, up to 50 m³
4 variants
Advice
Read before you buy.
Pool systems and equipment: how to put together a plant room
The four essential parts of a plant room – pump, filter, multiport valve and disinfection – and what is added as needed.

How much does an 8×4 m pool cost? Prices by size (2026)
8x4 m pool price: concrete skimmer ≈€35,000 (excluding the concrete shell), overflow +30%. Table of prices, volumes and equipment for sizes 6×3 to 12×6, plus realistic maintenance costs.

Bio pools: how they function, what they cost and whether they work in Dalmatia
A chlorine-free pool with a regeneration zone of at least 50% of the surface – what the regulation (NN 59/2020) requires and whether it makes sense in the south.




