
Astralpool E-Next pH salt chlorinator 12 g/h
Salt water chlorinator with pH control for pools up to 50 m³: 12 g/h of chlorine, pH measurement with a probe and dosing of corrector with a peristaltic pump.
Description
The AstralPool E-Next pH 12 is a compact salt water chlorinator with pH measurement and control, for pools up to 50 m³. It produces 12 g/h of chlorine by salt electrolysis, and measures the pH value of the water with a probe and maintains it with a peristaltic dosing pump. The stated volume applies to 8 hours of filtration per day and water at 25 °C; for warmer pools it is smaller.
Advantages
- pH control in the range 7.0–7.8; measuring range 0.0–9.9 pH, accuracy ± 0.1 pH
- Automatic calibration of the pH probe with pH 4.0 and pH 7.0 solutions
- Alarms for low (below 6.5) and high (above 8.5) pH
- Adjustable chlorine production 0 / 50 / 75 / 100%, “Cover” mode (10%)
- Transparent cell, self-cleaning titanium electrodes, flow detection and salt alarm
Installation and maintenance
The cell is installed vertically, glued to a Ø 63 mm PVC pipe (DN 50/63). The minimum flow rate through the cell is 3 m³/h. For pH control, a 1.5 l/h (230 V) dosing pump is used, which doses the pH corrector (pH minus). Leave the installation and the electrical connection to an authorised installer.
Specifications
| Chlorine production | 12 g/h |
|---|---|
| Pool volume | up to 50 m³ (8 h of filtration per day, water 25 °C) |
| Voltage | 230 V, 50/60 Hz |
| Current | 0.4 A (input) |
| Minimum flow rate | 3 m³/h |
| Number of electrode plates | 5 |
| Salinity | 5–12 g/l (recommended 5–6 g/l) |
| Production control | 0 / 50 / 75 / 100% |
| pH measuring range | 0.0–9.9 |
| pH control range | 7.0–7.8 |
| pH accuracy | ± 0.1 pH |
| pH calibration | automatic, with pH 4.0 and pH 7.0 solutions |
| pH alarms | below 6.5 and above 8.5 |
| Dosing pump output | 230 V / 500 mA AC (maximum) |
| Dosing pump | peristaltic, 1.5 l/h, 1.5 bar, Santoprene tube, 230 V |
| pH probe | epoxy body 12 × 150 mm, 0–80 °C, single junction, pH measuring range 0–12 |
| Connection | glued PVC joint Ø 63 mm (DN 50/63) |
| Maximum pressure | 1 kg/cm² |
| Operating temperature | water 15–40 °C |
| Protection rating | IP45 |
| Electrode service life | 8,000–10,000 h |
Documents
Need advice?
Call us with your pool's dimensions — we will tell you which filter, pump or heater fits, and what goes with it.
+385 95 377 6396Message us on WhatsAppRelated products
What customers buy with this.

Salt electrolysis
AstralPool E-Next salt chlorinator 12 g/h, up to 50 m³
4 variants

Pool chemicals
AstralPool pH minus granules 1.5 kg
2 variants
Advice
Read before you buy.
Pool systems and equipment: how to put together a plant room
The four essential parts of a plant room – pump, filter, multiport valve and disinfection – and what is added as needed.

How much does an 8×4 m pool cost? Prices by size (2026)
8x4 m pool price: concrete skimmer ≈€35,000 (excluding the concrete shell), overflow +30%. Table of prices, volumes and equipment for sizes 6×3 to 12×6, plus realistic maintenance costs.

Bio pools: how they function, what they cost and whether they work in Dalmatia
A chlorine-free pool with a regeneration zone of at least 50% of the surface – what the regulation (NN 59/2020) requires and whether it makes sense in the south.



